4XEM 2-to-1 RJ45 Splitter Cable Adapter - F/M- CAT5E. Used separately
4XEM’s 2-to-1 splitter cable is an ideal device to increase the number of RJ-45 network connections on an RJ-45 outlet. This allows for two Ethernet signals to go through a single CAT5E wire.
A technical product, this splitter is designed to greatly increase your Ethernet installations. On one end of the installation this splitter can connect two patch cables from a hub to a single patch panel. It is important to note that this product is not designed to connect one single Ethernet connection to two separate computers/devices—you would need to use a hub connection for that.
Problem it Solves: Enhance your Ethernet installation with 4XEM’s 2-to-1 RJ-45 Splitter cable adapter.
- CAT 5E cable compatibility
- Durable design
- 2-to-1 splitter increases network installations
- Allows two 10/100Mbps Ethernet signals
- Does not work to use one network to two devices—use Hub device instead
|Performance||Cable Rating||CAT5E - 100 MHz|
|Connector(s)||Connector A||1x RJ-45 Male|
|Connector B||2x RJ-45 Female|
|Hardware||Cable Jacket Material||PVC - Polyvinyl Chloride|
|Wire Gauge||24 AWG|
|Cable OD||0.19 in [4.9 mm]|
|Cable Length||4.76 in [121 mm] (Single Cable Section)|
|14.72 in [374 mm] (Total Overall)|
|Weight of Product||2.12 oz [60 g]|
|Packaging Information||Package Height||10.24 in [260 mm]|
|Package Width||3.15 in [80 mm]|
|Package Length||0.89 in [22.5 mm]|
|Shipping (Package) Weight||2.19 oz [62 g]|
|What's in the Box||Included in Package||1x RJ-45 CAT5E Splitter|
|Notes||Notes||This product is a 'Y' type splitter with 2 separate sections of cable and a junction point.
Only 1 network device can be used at a time. Both ports cannot be used concurrently.
|* Product appearance and specifications are subject to change without notice.|
|* Weights and measurements are approximate.|