North America’s top pre and post sales technical support. 4XEM Introduces new indoor Pan Tilt camera IPCAMWPTS. Top Ontario Police Department chooses 4XEM over Bosch. 4XEM launches new web site with enhanced search capabilities.
4XEM IP Camera, Network Camera, Video Server Manufacturer
4XEM Power Over Ethernet (POE) Splitter
Buy Now
View Cart
Checkout

4XEM Power Over Ethernet (POE) Splitter

Part Number: IPCAMPOESPLIT

IPCAMPOESPLIT Highlights
- Convey the power from a Category 5 network camera to a video server/network camera
- Short-circuit and overload protection
- Not supported by IPCAMW30, IPCAMWL30, IPCAMWPTZ and IPCAMWLPTZ

IPCAMPOESPLIT OverviewWhere to Buy 4XEM IPCAMPOESPLIT


Where to Buy

$34.58
In Stock		Buy Now
$40.07
Temp out		Buy Now
$41.99
In Stock		Buy Now
$43.99
1-3 Days		Buy Now
$43.99
Ships in 3-5 weeks		Buy Now

Prices are in U.S. dollars and only available to U.S. customers. Prices subject to change without notice.

Support

Support

Toll Free: 1-866-999-4936
Search FAQ Database

Join the 4XEM Mailing List

Email:

Overview
Features
Specifications

4XEM Power Over Ethernet (POE) Splitter Overview:


Power Over Ethernet (POE) integrates data and power over standard Ethernet cabling. It is a way to supply reliable, uninterrupted power to network cameras in hard to access places using Category 5 cable. Power Over Ethernet technology saves the time and cost of installing separate power cabling and AC outlets for each network camera.

The IPCAMPOESPLIT, POE Splitter connects to the DC Jack and RJ-45 port of the Network Camera. A Cat-5 cable runs from the POE Splitter to a POE Switch to a maximum of 100 meters. One IPCAMPOESPLIT is required per Network Camera.

The IPCAMPOESPLIT will supply a 12V maximum 1A precision regulated output. 4XEM Power Over Ethernet adapters have built-in ESD/lightning protection to help in preventing equipment damage due to transients and also have proprietary sensing algorithms which detect an overload or short circuit condition and shut down the supply to prevent equipment damage.

The IPCAMPOESPLIT is rated for operation at -10 to +60 deg C and up to 90% humidity, and will perform reliably in outdoor weatherproof enclosures.

Using Power Over Ethernet will allow you to locate your power supply at a central location where it can be attached to an uninterruptible power supply (UPS). The IPCAMPOESPLIT will connect your Network Cameras to a Power Over Ethernet Switch like the EPOEMS12, 4XEM's 12 port Power Over Ethernet MidSpan Switch.

Not supported by IPCAMW30 or IPCAMWL30. Limited functionality with IPCAMWPTZ and IPCAMWLPTZ


Free North American Technical Support

1 Year Warranty

IPCAMPOESPLIT Features

Package Contents
 
  • Convey the power from a Category 5 network camera to a video server/network camera
  • Short-circuit and overload protection
  • Not supported by IPCAMW30, IPCAMWL30, IPCAMWPTZ and IPCAMWLPTZ
  • Quick Guide x 1
  • Splitter Unit x 1

IPCAMPOESPLIT Specifications
 
Splitter Unit
Wide Range DC Input 13.5V to 60V DC
DC Output 12V
Switching Frequency 200KHz Typ
Output Ripple 1% Max
Line Regulation +/- 0.5%
Load Regulation +/- 1%
No Extra Cables Needed Yes
Short-Circuit, Overload Protection Yes
Power on LED Indication Yes
Input/Output Isolation Yes

Miscellaneous
Compliance IEEE802.3af.

Operating Environment
Operating Temperature -10 to +60 deg C
Storage Temperature -20 to +85 deg C
Operating Humidity 5% to 90% non condensing

Dimensions
Splitter Unit 85 mm(L) x 55 mm(W) x 36 mm(H)
Weight 4.6oz (130gm)