4XEM 50M 1080P HDMI Extender Extend 1080p HDMI Signal Up To 50M/150 Ft Over Cat5/Cat6 RJ45
4XEM’s 50M HDMI Extender (4XHDMIEXT50M) extends high speed HDMI signals up to 50 meters/150 Ft away from your HDMI or DVI-D source using Cat5e/Cat6 UTP/STP Ethernet cabling. The HDMI Extender supports HDMI video resolutions up to 1080p and offers 3 transmission modes — point-to-point mode, one point-to-many mode and cascade connection. The built-in IR extender function allows IR remote control of source devices from a remote viewing location by sending IR commands received in the vicinity of the display back to the source devices.
Problem it solves: Place your HD display anywhere in the room and know you have 150 feet of play to get a high resolution 1080p signal.
4XEM gear is respected industry wide for its high performance, premium quality and durability.
1 Input Device - 1 Output Device - 50 M Range - 4 x Network (RJ-45) - 1 x HDMI In
Support HDMI 1.2 protocol
Support full 3D
HDCP 1.2 protocol compliant
Support video input : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Signal tranmission :single cat-5e or cat-6(recommended) cables up to 50 metres instead
of HDMI calbes are connected between TX and RX Extender.
Support video output : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Audio format support : DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
LED indication : when power is supplied or device is working, LED relative to is light.
Support up to 20metres AWG26 cable length between extender and source & sink device
No loss of quality
Installs in minutes
Length of CAT-6 cable between Rx and TX…..……………….……………..Up to 60 metres